Q-see QD113P User Manual download pdf

INTRODUCTION

Thank you for your purchase of the Q-See QD113P

Portable Surveillance Device. This versatile tool is

built around an ultra-mini camera which combines

1.3-megapixel still photography and high-resolution

real-time video with audio in a compact, discrete

package. Store nearly 4,000 pictures or 2 hours of

video on the internal 4GB memory. View or save

your ﬁles on any PC with a USB port. Recharge the

pen with the included charger or from a computer’s

USB port. The ease of use, small size and el-

egant design make this a valuable tool for security

personnel, business people, students, tourists and

others.

STILL IMAGE CAPTURE VIDEO RECORDING PEN

Rotate the metal collar at the tip to

extend or retract the writing nib.

USB DRIVE

The pen can be used as a standard USB Flash

memory stick for transporting and transferring ﬁles.

INSUFFICIENT MEMORY OR BATTERY

When the camera’s memory is full or the battery

has run out of power, the Status Indicator light will

alternately ﬂash amber and blue for ﬁve seconds.

It will then save the current ﬁle and shut down. You

must remove the ﬁles stored on the memory to

make space available to record further or recharge

the battery as appropriate.

PARTS OPERATION

CHARGING

The pen features a high-capacity rechargable

lithium polymer battery. This form of battery does

not have a “memory” effect meaning that it can

be recharged at any time without loss of capacity.

However, it is recommended that you fully charge

the battery and then use the camera normally until

it is fully discharged before recharging. Cycling the

battery in this manner for the ﬁrst ﬁve times will

ensure maximum battery capacity and operation

time.

When charging the battery – whether using the

included charger, or plugged into an active USB

port – the status light will ﬂash yellow/amber until

the battery is fully charged. During the ﬁrst few

uses, allow the pen to continue charging for an

hour after the light stops ﬂashing.

When using the charger, both the green and red

lights will illuminate until the battery is fully charged.

When fully charged, only the red light will remain

illuminated.

SETTING DATE & TIME

To ensure that your camera records the proper

date and time on the ﬁles, you should run the

Setting Time Tools V2.0 program located in the

folder of the same name on the included mini-CD.

When the program launches, a Command window

will open and the program will update the date and

time based on your computer’s settings.

HELPFUL HINTS

• When taking pictures, you will get the best

results if both you and your subject are relatively

still.

• The camera should be at least one foot from

your subject when taking pictures.

• While recording video, you should try to keep

the camera steady and avoid rapid movements

for best video quality.

• You should not hold the pocket clip while taking

video in order to avoid blocking the microphone

or lens.

1. Operation Button

2. Status indicator light

3. Camera lens

4. Microphone

(behind pocket clip)

5. Reset button

6. USB plug

7. Mode Switch

Left = Video

Right = Still Image

8. Ball-point pen

1. Move the Mode Switch to

the right (use the pen’s tip if

needed.)

2. Press the Operation Button for

1 second. The Status Indicator

light will brieﬂy illuminate amber

before switching to the blue

“Ready” status.

3. Press once on the Operation

Button to take a picture. The

Status Indicator light will brieﬂy

ﬂash amber in addition to the

steady blue. The camera is

ready to take another picture.

4. To turn off the camera, press

and hold the Operation Button

until the Status Indicator light

goes off. To conserve energy,

the camera will automatically

turn off after a few minutes of

inactivity as well.

1. Move the Mode Switch to the

left (use the pen’s tip if needed).

2. Press the Operation Button for

1 second. The Status Indicator

light will brieﬂy illuminate

amber before switching to blue

indicating that the camera is

recording.

3. Press the Operation Button

again to end the recording. The

Status Indicator light will switch

from blue to amber indicating

that the recording has been

saved and the camera is now on

“standby” and ready to record

Summary of Contents

Page 1 - HELPFUL HINTS

INTRODUCTIONThank you for your purchase of the Q-See QD113P Portable Surveillance Device. This versatile tool is built around an ultra-mini camera whi

Page 2 - User Manual

PLAYBACKThe images and videos can be accessed by inserting the USB plug into computer’s USB port.Open it as you would any other drive or external USB

Comments to this Manuals

No comments

Q-see QD113P User Manual

Browse online or download User Manual for Cameras Q-see QD113P. Q-See QD113P User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Cameras Q-see QD113P