Q-See - Digital Peripheral Solutions Security Camera QS SERIES User Manual

1Setup Guide for Remote Internet and Smartphone Monitoring, MyQ-See DDNS, and Email NotificationRemote MonitoringSetup GuideQS SERIES DVR MODELSAndroid

18 192.1 ACCESSING YOUR DVR REMOTELYOnce you have configured the network settings on the DVR to match those on your router and forwarded the ports need

20 21PICTURE 2-8Setting Up ActiveX ControlSTEP 1. Open Internet ExplorerSTEP 2. Click on ToolsPICTURE 2-9PICTURE 2-10PICTURE 2-11STEP 4. Click on the

22 23PICTURE 2-14STEP 13. Click the Reset buttonSTEP 14. Click “Yes” when asked, “Are you sure you want to change the setting for this zone?”STEP 15.

24 25THE LIVE VIEW WINDOWAfter logging in, the Remote Surveillance main screen will appear in your browser.PICTURE 2-17# Item Function1 Modes LIVE, PL

26 27PTZ CONTROLYou must have a PTZ camera (not included) connected to the system in order to use the PTZ controls. Controlling a PTZ Camera• Select t

28 29SEARCHUse the calendar and drop-down menus to search for recorded video on your system.• Click < > to change the month on the calendar. Dat

30 31REMOTE SETUPUse the Setup tab to configure the settings of your system from a remote location. If the Main Menu is open on the system, you will no

32 33The system can send an email notification with a JPEG snapshot for triggered events on the system. Selecting Email Setup in the Alarm Setup menu w

34 354.2 MOBILE SURVEILLANCE SOFTWAREANDROIDPICTURE 4-3PICTURE 4-4PICTURE 4-5PICTURE 4-6STEP 1. Insert the CD that comes with your DVR into your compu

36 37 SettingsClicking on the gear icon will take you to the setup window. Address: The DVR’s public IP address or DDNSPort: DVR’s port server setting

2 3© 2011 Q-See. Reproduction in whole or in part without written permission is prohibited. All rights reserved. This manual and software and hardware

38 39Server Address: The DVR’s public IP address or DDNSServer Port: DVR’s port server setting (100 by default)User ID: The same User Name used on th

40 41PICTURE 4-23SettingsSTEP 1. Click the MEye icon to launch the program. STEP 2. Click Settings. Enter the IP address of your system or DDNS addres

42 43STEP 4. Allow the program to connect to the network.STEP 5. The message, “Install successful” will display after the program is finished installin

44 45WINDOWS MOBILESTEP 1. Copy the installation program named windows mobile.cab from the included CD to the Documents folder on your mobile phone.ST

46 47SettingsWhen you log in for the first time, you will need to configure your phone to connect to the DVR in the Settings menuPICTURE 4-39PICTURE 4-4

48 49QUESTIONS OR COMMENTS? CONTACT USPRODUCT SUPPORT, DOWNLOADS,FIRMWARE UPDATES & MANUALS24/7 Technical ResourcesLive Chat (M-F, 9-5 PST)www.Q-S

4 51. REMOTE ACCESS 61.1 Connecting your DVR to a Network 6Before you get started 6Obtaining an IP address 7Static IP 91.2 Opening Ports 10UPnP

6 7REMOTE ACCESSIn order to access your DVR remotely, you must connect it to a router or a modem. Using a router allows you to connect to your DVR fro

8 9PICTURE 1-4STEP 4. Make sure that DHCP is selected in the drop down menu at the top (item “a”). If it is not, select it, click Apply and then Exit

10 11PICTURE 1-51.2 OPENING PORTSIf you wish to access your DVR outside of your local network, you will need to configure your router to allow data to

12 13PICTURE 1-8CONFIRMING THAT PORTS ARE OPENEDWhether you used UPnP or DMZ to open your ports, you should confirm that they have been opened without

14 15PICTURE 1-12PICTURE 1-13PICTURE 1-14TY P EME D I A P O R TWE B P O RTIP A D DR 1 96 . 2 8 1. 9 4 1 .0 6 6AU TO 0 7

16 17STEP 5. Click on CHECK NOW to detect how many Routers are in the network.PICTURE 1-15PICTURE 1-16STEP 6. If there is only one router detected, an