Q-See QSW1001R User Manual

1 TABLE OF CONTENTS Introduction Before Using …………………………………………………………………………… 1 Packing List …………………………………………………………………………

10 Motion Detection ON/OFF (1) Press MENU to enter system main menu. (4) Press LEFT/RIGHT to motion detect on/off option. (3) Press OK to enter

11 Motion Detect Off Motion Detection Area (1) Press MENU to enter system main menu. (2) Press L

12 (7) Press LEFT/RIGHT to exit the option and then press OK to return to the setup. Exit Setup Press MENU to exit directly. Motion Detection

13 Exit setup Press MENU to exit directly. Motion Detection Interval Motion detection interval means that you can set 1, 3, or 5 second intervals

14 Exit Setup Press MENU to exit directly. Motion Detection Sensitivity The motion detection sensitivity range is 01-99. The lower the value,

15 (6) Press LEFT/RIGHT to exit option and then press OK return to setup. Exit Setup Press MENU to exit directly. For motion detection sensitivity

16 (1) Press MODE to playback interface in preview mode and the current image information will be shown at the bottom of the screen. (2) Press MODE

17 (5) Press MODE to return to preview mode. Using six thumbnail browse Choose Folder (1) Press MODE to go to playback interface in pre

18 (1) Press MODE to go to playback interface in preview mode. (2) Press MENU to go to delete menu. (3) Press LEFT/RIGHT to select Delete One, an

19 (2) Press MENU to go to delete menu. (3) Press LEFT/RIGHT to Format and then press OK to confirm. (4) Press LEFT/RIGHT to format or not forma

2 . BEFORE USING Special Attention 1. Connect all the parts before turning on the power. 2. Cut off the power before inserting or pulling out SD Card

20 Company Name Postal Address Postal code Phone Number E-mail Model Number of Product Serial Number of Product Purchase Date Distr

3 TECHNICAL SPECIFICATIONS Product Model QSW1001R Voltage DC 12V Power Consumption 300mA Standard memory 128MB SD Card Maximum memory 2GB

4 Front Cover 1) Power Switch 2) Power Input Jack 3) Video & Audio In 4) Video & Audio Out 5) Alarm 6) ANT Back Cover 1) Channel In

5 The Connection Diagram. 1. Connect PVR video-in port and camera with video wire. A wireless camera will communicate with the wireless antenna 2. Con

6 Date/Time Setup (1) Press MENU to enter system main menu. (2) Press LEFT/RIGHT to set date and then press OK. (3) Press LEFT/RIGHT to the neede

7 Record AVI/Photo Setup (1) Press MENU to enter system main menu. (2) Press LEFT/RIGHT to capture format AVI/Photo option. (2) Press OK to switc

8 NTSC/PAL Setup (1) Press MENU to enter system main menu. (2)Press LEFT/RIGHT to setup option, then press OK to confirm. (3) Press LEFT/RIGHT to

9 Image Quality Setup (1) Press MENU to enter system main menu. (2) Press LEFT/RIGHT to setup option and then press OK to confirm. (3) Press LEFT