4 CH DVR Quick Installation GuideMODEL QT17DVR4CVersion: 6214C-P01.010Package Contents: 1. 1-17" TFT w/built-in 4 Channel MPEG4 DVR 2. 4 - CCD
You can also connect to the DVR using the Internet Explorer web browser by typing your WAN IP & the Web port from the Network Set ( EX: http://75.
Installation:1. Attach the camera to the BNC connector and the power connection.Line up the slots on the yellow BNC connector (1) with the tabs on the
2. Make sure the Hard Drive (1) is in the bay (2) and locked.4. After you attach all 4 cameras you will see quad screen on the Monitor3. Plug th
To Record With Your DVR :There are 3 modes for recording.1. Manual recording: Push the RECORD button. It will record all the time until you stop it by
To Set Up Time Schedule Recording:Use the Remote Control and push SETUP and follow the instruction below:1. Select "Work Set" using the dire
To Playback the Recording:NOTE: Recording will not be interrupted while you are in Playback mode.1. Using the remote control, push CHECK Select &
To Back Up the files:You can use the USB cable and connect it directly from DVR to USB port on the PC and either copy it your PC hard drive or play it
To Monitor the Camera on a Remote Computer:Here is the connection diagram: To monitor your camera on a remote computer you need to forward your IP por
To Install the DVR6214 Remote Client Program:1. Insert the Remote Client Program CD into the CD/DVD-ROM drive on the computer2. Double click on the QT
Comments to this Manuals