Q-See CENTRAL MANAGEMENT User Manual

QSTC201/211 IP Camera User’s Manual Q-see Products 8015E.Crystal

QSTC201/211 IP-CAMERA USER MANUAL 10 Connection parameter descriptions: Name Description Check the Night Vision IR LEDS Power on, the IP-CAMER

QSTC201/211 IP-CAMERA USER MANUAL 11 make sure all anti-virus software in the computer is disabled so that CMS can install correctly.  System req

QSTC201/211 IP-CAMERA USER MANUAL 12 HDD 250GB Notice:  The above recommended specifications are for CIF resolution.  The AMD hyper-3800+ an

QSTC201/211 IP-CAMERA USER MANUAL 13 Figure2-5 Choose the installation destination 3. The default installation dest

QSTC201/211 IP-CAMERA USER MANUAL 14 Figure2-8 Setup Complete 6. Click “Finish” to complete setup, and see the “Contr

QSTC201/211 IP-CAMERA USER MANUAL 15 Figure2-9 Preview interface 8. Add device: User can add video monitor device or sub region under the heading o

QSTC201/211 IP-CAMERA USER MANUAL 16 Step 2: Click button; 'Add Device' dialog box will pop up refer to Fig 2-11: Fig 2-11 Add device Ste

QSTC201/211 IP-CAMERA USER MANUAL 17 Step 2: Clicking ‘Device Manager enters into “Device manager”, clickicon, add group name. Refer to Fig

QSTC201/211 IP-CAMERA USER MANUAL 18 3 Internet Explorer Remote Access The network service default settings are shown below: IP address: 192.168.0.2

QSTC201/211 IP-CAMERA USER MANUAL 19 Step 2: Open the IE Browser, input the default address of IP-CAMERA and confirm, the IE browser

QSTC201/211 IP-CAMERA USER MANUAL 2 Before using this product Before operating, we strongly advise users to read this manual and keep it handy for

QSTC201/211 IP-CAMERA USER MANUAL 20 3.2 WAN Setting up the router: Step1: Connect according to above steps in LAN, enter into System Con

QSTC201/211 IP-CAMERA USER MANUAL 21 Step3: Enter into the router’s management interface through IE browser; forward the port of IP-CAMERA to the IP

QSTC201/211 IP-CAMERA USER MANUAL 22 4 Remote Preview 4.1 The remote viewing interface is shown below: Fig 4-1 remote preview interface Symbol and

QSTC201/211 IP-CAMERA USER MANUAL 23 4.2 Configuration: Video Stream, Enable Audio Click right mouse, a pull-down list will appear as shown below:

QSTC201/211 IP-CAMERA USER MANUAL 24 Snap pictures: 1. Select a channel, click “Snap” icon, this will display Fig 4-3: Fig 4-3 Single snap 2. U

QSTC201/211 IP-CAMERA USER MANUAL 25 4.3 Using 2 Way Audio Here are instructions on how to use the 2 way communication feature on the camera:

QSTC201/211 IP-CAMERA USER MANUAL 26 5 Remote Live Surveillance 5.1 Main Menu Setup User can remotely setup the parameters of the device.

QSTC201/211 IP-CAMERA USER MANUAL 27 Fig 5-1 system configuration—server basic configuration interface 5.2.2 Date & Time configuration Setting

QSTC201/211 IP-CAMERA USER MANUAL 28 5.2.3 SD Card Setup steps: 1. Enter into "system configuration" –“Date & Time” refer to Fig

QSTC201/211 IP-CAMERA USER MANUAL 29 5. Press the "Save" button to save the settings. Fig 5-4 channel configuration—basic configuration i

QSTC201/211 IP-CAMERA USER MANUAL 3 Table of Contents 1 Introduction ...

QSTC201/211 IP-CAMERA USER MANUAL 30 5.3.3 Network image configuration 1. Enter into "Channel configuration"-- "Network image confi

QSTC201/211 IP-CAMERA USER MANUAL 31 5.4 Alarm configuration Alarm configuration includes seven submenus: motion detection, motion alarm, motion s

QSTC201/211 IP-CAMERA USER MANUAL 32 will be triggered when there was an alarm. 5. Select the matched channel in “Trigger PTZ” text box, select “To

QSTC201/211 IP-CAMERA USER MANUAL 33 Press the "Save" button to save the settings. Note: Day schedule is better than Week schedule. Fig 5

QSTC201/211 IP-CAMERA USER MANUAL 34 Fig 5-10 alarm configuration—sensor alarm interface 5.4.5 Sensor schedule Enter into “Alarm configuration&quo

QSTC201/211 IP-CAMERA USER MANUAL 35 Fig 5-11 alarm configuration—sensor schedule interface 5.4.6 Other alarm 1. Enter into “Alarm configuration&q

QSTC201/211 IP-CAMERA USER MANUAL 36 5.4.7 Alarm out 1. Enter into “Alarm configuration"— "Alarm output" refer to Figure 5-13: 2. S

QSTC201/211 IP-CAMERA USER MANUAL 37 4. Enable UPNP Double-click the “My Network Places” icon on the desktop in PC, select “Show icons for networ

QSTC201/211 IP-CAMERA USER MANUAL 38 5.5.2 IP configuration 1. Enter into "Network configuration"--"IP configuration", refer

QSTC201/211 IP-CAMERA USER MANUAL 39 Please refer to the following table for parameters and instructions of IP configuration. Static IP

QSTC201/211 IP-CAMERA USER MANUAL 4 5.5 Network configuration ...

QSTC201/211 IP-CAMERA USER MANUAL 40 5-17: 2. Select “wireless switch”, click “refresh” button, available wireless networks found by device

QSTC201/211 IP-CAMERA USER MANUAL 41 Fig 5-18 network configuration-- DDNS configuration interface 2. Press the "Save" button to save th

QSTC201/211 IP-CAMERA USER MANUAL 42 5.6 User configuration Enter into "User configuration" refer to Figure 5-19: Fig 5-19 User config

QSTC201/211 IP-CAMERA USER MANUAL 43 device on this PC in network only. If the MAC address was ““00:00:00:00:00:00” it can be connected t

QSTC201/211 IP-CAMERA USER MANUAL 44 Please refer to the following table for parameters and instructions of user configuration. User

QSTC201/211 IP-CAMERA USER MANUAL 45 Fig 5-22 Notification configuration—mail configuration interface 5.8 Advanced configuration Advanced configu

QSTC201/211 IP-CAMERA USER MANUAL 46 address” can’t operate at the same time. Fig 5-24 advanced configuration—security configuration interface 5.8.

QSTC201/211 IP-CAMERA USER MANUAL 47 6 Video Search Click “video search” icon, to search the images which are saved on the SD card refer to Figure 6

QSTC201/211 IP-CAMERA USER MANUAL 48 7 Mobile Surveillance This IP-CAMERA supports mobile surveillance by cell phones with Windows mobile

QSTC201/211 IP-CAMERA USER MANUAL 49 7.1 Accessing by Phones with Windows Mobile Pro Please use cell phones or PDAs with WinCE versions supported

QSTC201/211 IP-CAMERA USER MANUAL 5 1 Introduction 1.1 Product Summary This IP-CAMERA is a video surveillance device designed especially for CCTV

QSTC201/211 IP-CAMERA USER MANUAL 50 STEP 4: PCam will be opened after installed. STEP 5: Input the server’s address, ID, and password respectiv

QSTC201/211 IP-CAMERA USER MANUAL 51 Note: User name and password here are the same as that used on the DVR. The defaults are user name “admin” an

QSTC201/211 IP-CAMERA USER MANUAL 52 STEP 5: A Scam shortcut icon appears on the system menu after finished. STEP 6: Run Scam program. STE

QSTC201/211 IP-CAMERA USER MANUAL 53 STEP 8: Input the server’s address, ID and password respectively. Then click OK to login to the DVR.

QSTC201/211 IP-CAMERA USER MANUAL 54 DVR. The defaults are user name “admin” and password “123456”. 7.3 Accessing from iPhones At

QSTC201/211 IP-CAMERA USER MANUAL 55 Step 3: Click SuperCam, to enter into “introduce” interface and click FREE”, it will change into I

QSTC201/211 IP-CAMERA USER MANUAL 56 display: Note: if this is the first time you are operating please enter your user ID; if you do not have a Stor

QSTC201/211 IP-CAMERA USER MANUAL 57 Step 7: Click Live View, the default Cam1 picture will be displayed. Click to capture picture. Cli

QSTC201/211 IP-CAMERA USER MANUAL 58 Step 8: Click Image View on program interface to view the captured picture. Click or to

QSTC201/211 IP-CAMERA USER MANUAL 59 the data cable. When prompt message appears click Continue , refer to below interface. Input user’s ID and pass

QSTC201/211 IP-CAMERA USER MANUAL 6 Functions of accessories: NO. Accessories Description 1 IP-CAMERA module The Camera 2 Power adapter Th

QSTC201/211 IP-CAMERA USER MANUAL 60 Step3: Click searched “SuperCam”, refer to below picture. Step 4: Click“GET APP”, an input box will pop up.

QSTC201/211 IP-CAMERA USER MANUAL 61 “Applications”. Check ”Sync applications” and “SuperCam”. Then click “Apply” in the lower-right corner, and wai

QSTC201/211 IP-CAMERA USER MANUAL 62 8 Questions & Answers 1. Q: I forgot the password, how can I reset it? A Press “RESET” button for 4 seco

QSTC201/211 IP-CAMERA USER MANUAL 63  select Security------Custom Level….refer to Fig 4-1 Fig 4-1

QSTC201/211 IP-CAMERA USER MANUAL 64 6. QHow can I set this IP Camera up on a wireless router? A: 1. Connect camera to the Router using t

QSTC201/211 IP-CAMERA USER MANUAL 65 15. If you want to remotely view this camera from outside the network, you need to forward port 80 an

QSTC201/211 IP-CAMERA USER MANUAL 66 9 Specifications

QSTC201/211 IP-CAMERA USER MANUAL 67

QSTC201/211 IP-CAMERA USER MANUAL 68 10 Q-See Product Warranty Thank you for choosing our products. All of our products users have a conditional fr

QSTC201/211 IP-CAMERA USER MANUAL 69 Customer Information Card User’s Name Mr./Mrs. Company Name Postal Address Postal code Phone Number E-ma

QSTC201/211 IP-CAMERA USER MANUAL 7 Item Name Description

QSTC201/211 IP-CAMERA USER MANUAL 70 The material in this document is the intellectual property of our company. No part of this manual may b

QSTC201/211 IP-CAMERA USER MANUAL 8 2 Installation 2.1 Attach IP-CAMERA to Ethernet network The connection of the digital video server is show

QSTC201/211 IP-CAMERA USER MANUAL 9 User can connect the PC (Surveillance Center) and IP-CAMERA as shown in the above picture. Before connecting to