12 13
Time Search
This search mode differs in that it’ll show a 24-hour timeline for each channel with blocks
indicating when a video record took place.
PICTURE 21
PICTURE 22
PICTURE 23
To begin playback, simply
select a channel and then tap
on Play.
A progress bar will appear
below the video along with
the start and end times of the
video clip. Simply drag the
playback point to the desired
segment of the video. The time
on the left will change to show
the time that the particular
video segment was recorded.
Depending on the speed of
the Internet connections at
your DVR and your mobile
device, you may experience a
delay between when you drag
the point and when the video
begins playing from that point.
Tap on Close to end the
playback and return to the
search results.
Event Search
This operates in the same
manner as the Local File
search, but returns results for
video stored on the DVR’s hard
drive. In addition, it will list the
type of event, such as Motion
Detection or Alarm.
Simply tap to begin playback.
A progress bar identical to the
one appearing in Time Search
will appear to allow you to
progress through the video.
Remote File Search
This last search mode is best
used when you have a channel
set to constantly record but it
also works if you know when
an event occurred.
The results list and playback
will resemble that seen in the
Event Search, above, but
will not show the event type,
rather it’ll display the start and
end times along with which
channel.
PICTURE 24
PICTURE 25
SETTINGS
The Settings menu is also located at the top of the screen. It allows you configure both QT
View on your mobile device as well as make or change settings on your DVR itself. The local
settings are covered in this manual along with the Schedule and PTZ on-DVR settings. The
remainder of the on-DVR settings mirror those conducted at the DVR itself and are therefore
covered in the User Manual.
Local Settings
You can set the maximum amount of space set aside for video recordings on your device
using the Storage options.
The Display settings allow you to set the application to launch in your preferred viewing
mode, whether single view, or multiple channel display.
Alarm enables an audio and vibration alert when the DVR either detects motion or some other
alarm input.
Enabling Auto Reconnect will cause the program to attempt to re-establish your connection
to the DVR if it is lost.
(5 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals