Q-See QT SERIES User Manual download pdf (Page 8)

14 15

PICTURE 26

PICTURE 27

Schedule Settings

This area is generally set up when you ﬁrst conﬁgure your DVR, but you may ﬁnd it necessary

to change a recording schedule while you’re away from your DVR.

You’ll be able to change the schedule for general recording, motion detection recording and

alarm-based recording for each camera. Adjusting the schedules for any of these modes is

identical. Simply touching and dragging in the desired time block and it’ll turn blue to indicate

that it’ll be active during that time. Touching the blue area and dragging will return it to gray to

deactivate that function.

You can copy and paste your settings between cameras. Be sure to tap on Save to preserve

your settings.

PTZ Settings

Conﬁguring your PTZ camera is best done at the DVR itself, but if you ﬁnd it necessary to

update a Preset point, a Cruise or Track, that can be done in the Advanced segment of the

PTZ Settings menu.

Tapping on the Advanced

button at the bottom of the

PTZ Settings menu gives you

access to your PTZ camera’s

settings. Simply tap on the

Setting button corresponding

to the desired function for the

correct channel and adjust

using the PTZ controls or by

enabling/disabling as needed.

Tapping on Save will save your

settings.

Online Users shows which users are remotely connected to your DVR.

LOGOFF

You can exit QT View by pushing the large button on your device, just like any other program.

Or you can tap on the Logoff button which will return you to the Login screen.

INFORMATION

The three windows available under the Information menu allow you to access information

about your DVR, your network and which users are currently logged into your system

PICTURE 28

The information displayed in

these three windows cannot

be altered.

System shows your DVR’s

name as well as the software

and hardware conﬁguration.

Network provides details on

your IP and router address

along with which ports are in

use and connection status

along with other information.

Detailed explanations on these

items and their conﬁguration

can be found in the Remote

Monitoring Guide.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Q-See QT SERIES User Manual Page 8

Comments to this Manuals

Related products and manuals for Networking Q-See QT SERIES