Q-see QT528 User Manual download pdf (Page 23)

4.3.2 Record stream

Step 1: Enter into system configurationrecord configurationrecord bit rate; refer to Fig 4-12:

Fig 4-12 Record Configuration-Record Bit Rate

Step 2: Setup rate, resolution, quality, encode and max bit stream

Step 3: User can setup all channels with same parameters, checkmark “All”, then to do relevant setup.

Step 4: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to

exit current interface.

Note: if you set a value that is higher than maximum supported by the device, the value will be adjusted

automatically.

Definitions and descriptions of Record stream:

Parameter

Definition

FPS

Range from 1-30 (NTSC) 1-25 (PAL)

Rate

Range from: 1-30（NTSC）1-25(PAL)

Resolution

CIF or D1 Each camera can use either resolution option

Quality

The quality of recorded images. The higher the value, the clearer the

recorded image is. Six options: lowest, lower, low, medium, higher and

highest.

Encode

VBR and CBR

Max bit

stream

Range from: 64 Kbps、128 Kbps、256 Kbps、512 Kbps、768 Kbps、1Mbps、

2 Mbps

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 97 98

No comments

Q-see QT528 User Manual Page 23