Q-see QT528 User Manual download pdf (Page 34)

4.6.1 Network

Step 1: Enter into system configurationnetwork configurationnetwork; refer to Fig 4-29:

Fig 4-29 Network Configuration-Network

Step 2: HTTP port: the default value is 80. If this value is changed, user needs to add the port number when typing IP

address in IE address blank .i.e. set HTTP port to 82, IP address: http://192.168.0.25, user needs to input this

address: http://192.168.0.25:82 into IE browser. Server port: communication port

Step 3: Checkmark the "Obtain IP address automatically", the device will receive IP address, subnet mask, gateway

IP from the router the DVR is attached to.

Step 4: Enable PPPOE, user can directly connect the DVR to internet via ADSL, then input the user name and

password; click TEST button to test the effectiveness of supplied information. You will need to get the account

information from your internet service provider.

Step 5: Enable DDNS server: user needs to input user name, password and host domain name of the registered

website, click TEST to test the effectiveness of information you input.

Step 6: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to

exit current interface.

3. Definitions and descriptions of network configuration:

Parameter

Meaning

HTTP port

Port to access from IE browser. The default port is 80

Server

port

The port number for data. The default port is 6036

Static IP

IP address

The IP address of the DVR

Subnet

mask

The subnet mask of the server

Gateway

The gateway of the router

DNS

server

The address of DNS server

PPPoE

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 97 98

No comments

Q-see QT528 User Manual Page 34